Series 102
Magnetic Plate Lifter
A steel plate lifter built on two TP-1000 electro-permanent magnets. Plug into standard 120VAC, set the system on the plate with the operator handle, and lift with a single-hook crane.
› Handles 4′ × 8′ plate — 3/16″ to 1″ thick A36 steel
› Electro-permanent magnets — no battery backup, no constant power
› Radio remote control — two-button radio, backup buttons on the system
1,325 lb
Max lift capacity
450 lb
System weight
3 : 1
Safety factor
120 VAC
Standard plug
Series 102 in Use
Designed for 4′ × 8′ plates, this low-headroom lifter is ideal for small workstations and cutting tables. Two TP-1000 electro-permanent magnets allow a single operator to handle plates efficiently. Powered by a standard 120V AC outlet, the system delivers heavy-lifting capability in a compact, versatile design.
Series 102 Specifications
TP-1000 electro-permanent system for 4′ × 8′ steel plate from 3/16″ to 1″ thick, plus the manual REM-2200 configuration for 5′ × 10′ plate.
| Model | Series 102 TP-1000 Plate Handling System |
|---|---|
| Plate handled | 4′ × 8′ plate, 3/16″ to 1″ thick, A36 steel, uncoated and unpainted |
| Max lift capacity | 1,325 lb |
| System weight | 450 lb |
| Magnets | (2) TP-1000 electro-permanent magnets, 3:1 safety factor |
| Power | Standard 120VAC plug. Electro-permanent by design: no battery backup needed if power fails, and no constant power required as with an electromagnet. |
| Control | Two-button radio remote, with backup buttons on the system itself |
| Sling | Two-part, single lift point chain sling for added stability during operation |
| Placement | Operator handle for precise placement of the system on the plate |
| Magnet mounting | Quick release pins secure the magnets to the frame. Additional holes can be cut in the frame to reposition the magnets. |
| Storage | “Sit-down” bumpers on the magnets: no special feet or storage stand needed |
| Finish | Permadur orange paint |
Every Series 102 is configured to the customer’s plate sizes and weights. Need a system customized for your application? Contact Permadur.
ALSO AVAILABLE
Manual Configuration (REM-2200)
The Series 102 can also be built with manual REM-2200 permanent magnets and no electrical power. The drawing shows the 5′ × 10′ plate configuration.
| Magnets | (2) REM-2200 manually controlled permanent rare earth lifting magnets, 2,500 lb each on 2-3/8″ mild steel plate, 3:1 safety factor |
|---|---|
| System capacity | 4,595 lb |
| System weight | Approx. 400 lb |
| Load beam | 6′ beam, 7′ overall; magnet position 4′ minimum to 6′ maximum |
| Max plate size | 5′ × 10′ |
| Overall height | 3′-11-3/8″ with chain sling (side view) |
| Attachment | Chain sling to a single-hook crane; quick pull pin |
| Design category | Category B, Service Class 2 |
Capacity for thinner plate must follow the applicable magnet ratings and operating instructions.
Come See the Series 102 at FABTECH
FABTECH Las Vegas, October 21–23, Booth C2335. To learn about all the capabilities of this system or pricing, stop by the booth or call 908-359-9767.
Built for Steel Plate
Electro-permanent magnets
No battery backup is needed if the power fails, and the magnets don’t need constant power like an electromagnet. Standard 120VAC plug.
Radio remote control
A two-button radio controls the magnets, with backup buttons on the system itself.
Adjustable magnet placement
Quick release pins and added holes in the frame let operators move the magnets to avoid problem nesting areas or adapt to other plate sizes and widths.
Need a System Customized for Your Application?
Send us your steel plate sizes, thicknesses and weights. We’ll configure the Series 102 to your application and send a formal quote.
Series 102 Magnetic Plate Lifter FAQ
How does the Series 102 TP-1000 work?
What steel plate can it handle?
What happens if the power fails?
What power does it need?
Can the magnets be repositioned?
How do I get pricing or see it in person?
Related Lifting Equipment
Loadpositioner
Control the last critical inches of a lower — 1,000 to 40,000 lb capacity.
Manual Lifting Magnets
Permanent magnets with a lever — no power required, 200 lb to 4,400 lb.
Service & Repair
Inspections, repairs and rebuilds — keep your lifting equipment working.
