Thin Plate Handling Systems
Permadur’s Thin Plate Handling Systems are built to support the handling of gauge material thinner than 3/16″ thick. We utilize a special Permadur Electroperm Magnet whose magnetic intensity / depth of field can be reduced or increased depending on the Plate thickness.
These systems are built to:
- Not drop a suspended load due to loss of electrical power, faulty wiring, or misoperation of controls
- Consume no power during lift
- Need no back up Battery System
- Require no Installation Costs
Permadur Series 612
Through the use of our Permadur BPR-350 ElectroPerm Lifting Magnet, we are able to build Plate Handling Systems that can provide single plate handling off a stack down to 16-18 Ga. plate.
This particular Series 612 System is being used to handle 4×8 and 5×10 plates from 11 ga. to 1” Thick (2100# Max.). As with our other Systems, all that is required is a brief pulse of current to the magnets to turn them ON or OFF. These Magnets will not drop a load due to loss of electrical power.
Let us do the heavy lifting.
Permadur’s experienced engineering staff is always available to answer your questions about vacuum lifting devices, permanent lifting magnets, and other lifting systems.