Multiple Part Handling Magnet Systems
Permadur Multiple Part Handling Magnet Systems can provide higher productivity and lower costs for both Steel Fabricators and Steel Service Centers by reducing the Material Handling time required to offload Cut Parts and Skeleton.
These systems are designed to:
- Not drop a suspended load due to loss of electrical power, faulty wiring, or misoperation of controls
- Consume no power during lift
- Offer remote control options
- Need no Back Up Battery System
- Require no installation costs
Permadur Series 2250
This Permadur Series 2550 Plate/Multiple Part Handling System was built with 50ea. BP-1600 Lifting Magnets on a 30’ load beam. The Magnet are fixed on 14.25” Centers. The Controller provides Selectivity by Magnet Row, 25ea., and by Magnet, 50 each.
Permadur’s Exclusive Safety Indicator Lighting System confirms the Magnets have attached to the load in preparation for a safe lift. This Controller was also built with System ON/OFF/HIGH Radio Controls in addition to hard-wired PB Pendant Controls positioned at both ends of the load beam. As yet another control alternative this System was wired to support ON/OFF/HIGH System Controls via the Crane Pendant or Radio Controller.
Let us do the heavy lifting.
Permadur’s experienced engineering staff is always available to answer your questions about vacuum lifting devices, permanent lifting magnets, and other lifting systems.