Heavy Plate Handling Systems
Permadur’s Heavy Plate Handling Systems provide a higher lifting capacity per magnet in comparison to our very similar Large Plate Handling Systems.
These systems are built to:
- Not drop a suspended load due to loss of electrical power, faulty wiring, or misoperation of controls
- Consume no power during lift
- Allow Remote Control options
- Integrate with Overhead Crane Controls if needed
- Need no back up Battery System
- Require no Installation Costs
Permadur Series 510
This Permadur Series 510 Plate Handling System is built with 10ea. FP-4000 Lifting Magnets on a 14’ load beam. The four outside Magnet rows can be adjusted along the length of the load beam. The Controller pictured provides Selectivity by Row, 5ea. The Controller also offers Permadur’s Exclusive Safety Indicator Lighting System that confirms that the Magnets have attached to the load in preparation for a safe lift.
In addition to ON/OFF Pendant Controls the Controller includes Radio Remote ON/OFF System Controls. This System attaches to a Single Hook Hoist via a 4 Part Sling Assembly. The power supply for this System is 460 VAC. Permadur Lifting Magnets are Electrically Controlled Permanent Magnets that will not drop a suspended load due to loss of electrical power or misoperation of the Controls. No Back Up Battery System is required.