PERMADUR Plate Handling Systems provide SAFE and EFFICIENT Material Handling. The system pictured is a PERMADUR Series 918 Plate Handling System with 18 TP-2000 lifting magnets on a 36′ load beam that enables the system to be suspended either from a fork truck or a single/double hook overhead crane. Each of the magnet crossarms can be manually repositioned on the load beam.
The controller provides selectivity by row (9) and is powered by an on-board 24VDC wet cell battery power supply with built-in charger. Radio controls enable the fork truck or crane operator to control the system from the cab; a backup hard-wired push-button pendant is also included.
The controller offers Permadur’s exclusive Safety Indicator Lighting System that confirms the magnets have attached to the load in preparation for a safe lift. PERMADUR lifting magnets are electrically controlled permanent lifting magnets that will not drop a load due to loss of electrical power.
- Series 918 Plate Handling System
- 18 ea. TP-2000 lifting magnets
- 36′ load beam
- Suspend from fork truck or single/double hook overhead crane
- Manually repositionable magnet crossarms
- Selectivity by row (9 ea.)
- On-board 24VDC wet cell battery power supply with built-in charger
- Radio controls plus backup hard-wired PB pendant
- Exclusive Safety Indicator Lighting System
- Electrically controlled permanent lifting magnets (will not drop load on power loss)
