PERMADUR Multiple Part Handling Systems dramatically increase torch ON time.
The system pictured is a PERMADUR Series 2550 Plate/Multiple Part Handling System with 50 BP-1600 lifting magnets on a 30′ load beam. Magnets are fixed on 14.25″ centers. The controller provides selectivity by magnet row (25) and by magnet (50). PERMADUR’s exclusive Safety Indicator Lighting System confirms the magnets have attached to the load in preparation for a safe lift. This controller was also built with System ON/OFF/HIGH radio controls in addition to hard-wired push-button pendant controls at both ends of the load beam. As another control alternative, this system was wired to support ON/OFF/HIGH system controls via the crane pendant or radio controller. The system load beam supports attachment to a single-hook crane via a 6-part sling suspension, with a holding rack when the system is not in use.
Specs from the brochure:
- Series 2550 Plate / Multiple Part Handling System
- 50 × BP-1600 lifting magnets
- 30′ load beam; magnets on 14.25″ centers
- Selectivity by magnet row (25) and by magnet (50)
- Safety Indicator Lighting System
- Controls: ON/OFF/HIGH radio, hard-wired PB pendants both ends, crane pendant/radio ON/OFF/HIGH
- Single-hook crane via 6-part sling suspension + holding rack
- System weight 5,400 lbs; system capacity 50,000 lbs (marked on equipment in brochure photo)
- Brochure generations labeled: First Generation 2001, Second Generation 2009
