by Permadur | Dec 1, 2025
Permadur Series 618 Plate/Strip Vacuum Handling System with fixed sling, 1500 Power Pac, selector valve for strip handling, and 6 swivel crossarms. A clearly visible marking on the orange load beam in the brochure photo reads SYS. WT. 4,600 lbs. Detail photos show the...
by Permadur | Dec 1, 2025
PERMADUR Thin Plate Handling Systems. Through the use of the PERMADUR BPR-350 ElectroPerm lifting magnet, Permadur builds plate handling systems that can provide single plate handling off a stack down to 16–18 ga. plate. The pictured Series 612 system is being...
by Permadur | Dec 1, 2025
PERMADUR Plate Handling Systems provide SAFE and EFFICIENT Material Handling. The system pictured is a PERMADUR Series 612 Plate Handling System with 12 TP-2000 lifting magnets on a 36′ load beam. The magnet rows can be adjusted along the length of the load beam...
by Permadur | Dec 1, 2025
The system pictured is a PERMADUR Series 515 Plate/Part Handling System. This system consisted of a 1500 Power Pac and fifteen vacuum pads on a 10′ load beam. Ten VPN-20-30 vacuum pads and 5 VPN-6SO-30 pads on five crossarms support 8′×12′...
by Permadur | Dec 1, 2025
The system pictured is a PERMADUR Series 612 Jacket Handling System. This system consisted of a 3000 Power Pac and 12 VPN-16EL-30 vacuum pads on 6 specially designed crossarms to straddle the rail car jacket on a 50′ load beam. The load beam was designed to...
