Plate Handling Magnet Systems

Material Handling Magnets

Utilizing the performance and safety features of the Permadur Lifting Magnets, these steel plate handling systems can be manned with a single operator as well as handle a single plate off of a stack. All of which can significantly increase your material handling efficiency. Let Permadur’s application engineers custom design a Plate Handling System to best fit your material handling application.

what we offer

Heavy Plate
Handling

Large Plate
Handling

Small Plate
Handling

Sheet Handling
Equipment

Material Handling Magnets

8’ x 20’-50’ Plate Sizes

These Permadur Heavy Plate Handling Systems are very similar to our Large Plate handling Systems, but typically will utilize an array of our FP-4000 Lifting Magnets to provide a higher lifting capacity per magnet.

Plate Lifting Magnets

8’ x 20’-50’ Plate Sizes

These Permadur Large Plate Lifting Magnets typically are handling steel plate sizes ranging from 8′ Wide x 20′-50′ in Length and are 3/16″ to 1″ Thick. These Systems include selective controllers (typically by Row), utilize either a self-contained rechargeable battery or Single Phase AC Power Supply, and include Spring Suspension Assemblies for each Magnet to insure proper load sharing.

4’ x 8’, 5’ x 10’, 6’ x 12’ Plate Sizes

These Permadur Small Plate Handling Systems are typically designed to handle 4’ x 8’, 5’ x 10’. And 6’ x 12’ plate sizes with thicknesses ranging from 3/16” to 1”. For thinner plate in this size range please refer to the Thin Plate Handling Section or Vacuum Lifting Systems.

Sheet Lifting—3/16” thickness or less

These Permadur Thin Plate Handling Systems are built to support the handling of thinner gauge material. In order to provide single plate handling off a stack for plates thinner than 3/16″ thick, we utilize a special Permadur Electroperm Magnet whose magnetic intensity / depth of field can be reduced or increased depending on the Plate thickness.

8’ x 20’-50’ Plate Sizes

These Permadur Heavy Plate Handling Systems are very similar to our Large Plate handling Systems, but typically will utilize an array of our FP-4000 Lifting Magnets to provide a higher lifting capacity per magnet.

8’ x 20’-50’ Plate Sizes

These Permadur Large Plate Handling Systems typically are handling steel plate sizes ranging from 8′ Wide x 20′-50′ in Length and are 3/16″ to 1″ Thick. These Systems include selective controllers (typically by Row), utilize either a self-contained rechargeable battery or Single Phase AC Power Supply, and include Spring Suspension Assemblies for each Magnet to insure proper load sharing.

4’ x 8’, 5’ x 10’, 6’ x 12’ Plate Sizes

These Permadur Small Plate Handling Systems are typically designed to handle 4’ x 8’, 5’ x 10’. And 6’ x 12’ plate sizes with thicknesses ranging from 3/16” to 1”. For thinner plate in this size range please refer to the Thin Plate Handling Section or Vacuum Lifting Systems.

Sheet Lifting—3/16” thickness or less

These Permadur Thin Plate Handling Systems are built to support the handling of thinner gauge material. In order to provide single plate handling off a stack for plates thinner than 3/16″ thick, we utilize a special Permadur Electroperm Magnet whose magnetic intensity / depth of field can be reduced or increased depending on the Plate thickness.

Let Permadur’s application engineers custom design a Plate Handling System to best fit your material handling application.

leave the heavy
lifting to us

The time has come to take the next step for your material handling magnets needs. 
Let us help get what you need.

Related Reading about Plate Lifting Magnets